| Blancett Flow Meters |
- Flowmeters
- 1100
- QuikSert
- Series 200 / 900
- FLoClean
- Scaler
- B2800
|
|
| 1100 Threaded Turbine | Downloads |
 |
The Blancett Model 1100 Turbine Flow Meter is designed to meet the demands of the most rigorous flow measurement applications. The Model 1100 is an ideal meter for liquid flow measurement on or off the oilfield. The meter features a 316 stainless steel housing and rotor support, CD4MCU stainless steel rotor, and abrasion-resistant tungsten carbide rotor shaft and journal bearings. These materials help the meter to maintain accuracy and mechanical integrity when measuring the corrosive and abrasive fluids found in many industries. |
 |
 |
|
| QuikSert In-line Turbine |
Downloads |
 |
The Blancett QuikSert In-line Turbine Flow Meter provides the high accuracy and rigorous design of the standard Blancett turbine, but in a wafer-style mounting configuration. With a unique "between-the-flange" design, the need for mating flanges is eliminated, saving installation time and cost, and allowing for limited space requirements. The meter features a 316 stainless steel housing and rotor support, CD4MCU stainless steel rotor, and abrasion-resistant tungsten carbide rotor shaft and journal bearings. Precision upstream and downstream flow straighteners ensure a high degree of measurement accuracy. |
|
|
|
| Series 200 and Series 900 |
Downloads |
 |
The Blancett Series 200 and Series 900 are rugged, low-priced flow meters specifically designed to measure floodwater line flow in secondary oil recovery operations throughout the world. Using time-proven rotary vane and multi-jet impeller mechanisms, the Series 200 and 900 flow meters will provide reliable long-term measurement and totalization with minimum attention and maintenance. |
|
|
|
| FloClean Sanitary Turbine |
Downloads |
 |
The Blancett FloClean Sanitary Turbine Flow Meter provides the high accuracy and rigorous design of the standard Blancett turbine in a sanitary-style tri-clamp mounting configuration. Developed for use in a variety of food, beverage and pharmaceutical applications, the FloClean Sanitary Turbine meets the requirements of 3-A Sanitary Standard number 28-03 and is suitable for use in clean-out-of-place (COP) and sterilize-out-of-place (SOP) environments. The meter features a 316L stainless steel body and internal wetted parts, with nickel-plated CD4MCU stainless steel turbine and tungsten carbide rotor shaft. |
|
|
|
| K-Factor Scaler |
Downloads |
 |
The Blancett K-Factor Scaler converts a low level frequency output (such as the output from a Blancett turbine flow meter) into a scaled square wave output signal. This adjustable frequency divider converts or "scales" the turbine meter output into units of measurement needed for a particular application and recognized by almost any data collection device. The k-factor scaler provides an amplified signal, even when a frequency conversion is not required. This signal is more immune to electrical noise and capable of transmission over longer distances than a raw turbine meter output. |
|
|
|
| B2800 microprocessor-based flow monitor |
Downloads |
 |
The B2800 is an advanced microprocessor-based flow monitor that is also low cost and simple to operate. When ordered with a Blancett turbine meter, the B2800 is configured at the factory for units of rate and total. Or, the unit may be easily programmed in the field. The monitor has a large two-line display and is available in power and mounting options to suit almost any application. |
|
|
