GPI Precision Meters
Flowmeters
TM Series Water Meter
TM Series water meters are an economical alternative to traditional water meters. GPI water meters offer flow rate and flow total indication. These water meters provide low cost flow indications in applications of water, wastewater, water treatment and sub-metering. Because of their low cost and common fittings they are ideal for sub-metering and OEM applications. TM water meters are available in five sizes and flow ranges for measuring water from 1 to 200 GPM. Choose either NPT or solvent weld fitting type.
01N Series Electronic Digital Meters
Mount this meter on the end of a hose or on a pipe, in-line. The compact design with large display makes this meter handy and easy to read.
- Flow range for the 01 Series is 3 to 30 GPM (10 to 100 LPM).
- Typical accuracy is ± 2.5% (accuracy can vary ± 5%.)
- Powered by two AAA batteries that are simple to replace.
- Gallon and litre models available.
G2 Industrial Meters – PVC
The G2 PVC Meter is an exceptional meter for use in metal-free applications. The PVC Meter is an economical alternative stainless steel meters when used for water. The PVC Meter is durable, lightweight easy-to-install in-line. Use this meter with water and mild chemicals such as alcohol or beer.
G2 Industrial Meters – PVDF
Looking for a turbine meter that can handle aggressive chemicals. Look at the PVDF Meter for a housing material that resists abrasion and has great chemical compatibility. Use PVDF Meters with harsh chemicals: Bleach, Ferric Chloride, Phenol, Sulfuric Acid or Phosphoric Acid.
01A Series Fuel Meter
- Lightweight, accurate, and reliable turbine meter with rugged aluminum housing and sealed electronic circuitry.
- Powered by two AAA batteries that are easy to replace.
- Factory calibrated for petroleum fuel with a choice of gallon and liter measurement.
- Works well on any pump or gravity feed system
A1 Series Commercial Grade Meter
GPI Commercial Grade Meters are identified by an A1 prefix. Commercial Grade Meters are packaged as a self-contained unit. Select this meter when you need an accurate, basic meter. GPI Commercial Grade Meters come in Aluminum and Nylon. Choose one of three sizes of Aluminum meters for petroleum products. Use the Nylon meters for water or non-aggressive chemicals.
Downloads: manual | data sheet_
G2 Industrial Meters – Aluminum
GPI offers a full line of Industrial Meters in a variety of housing materials. Aluminum meters are best suited for petroleum based products. The modular design allows for maximum flexibility in meeting custom applications. Models are available with ISO or NPT fittings.
Downloads: manual | data sheet
G2 Industrial Meters – Brass
The G2 Industrial Brass Meter allows another choice for fluid compatibility. The GPI Brass Meter works well with most water applications. Use with glucose, lacquer thinners and vegetable juices for example.
Downloads: manual | data sheet
G2 Industrial Meters – High Pressure
This is the turbine meter of choice for high pressure applications like spray washers. PSIG for the GPI High Pressure Meter is 3,000 compared to 1,500 for the normal stainless steel meter. This proven meter can perform in all kinds of high pressure applications.
Downloads: manual | data sheet
G2 Industrial Meters – Stainless Steel
The GPI Stainless Steel Meter line has a proven track record in the industrial market. GPI Stainless Steel Meters are rugged and dependable. Use stainless steel meters for most chemicals: Ammonium, Plating Solutions and Fuel products.
Downloads: manual | data sheet
G2 Industrial Meters – ANSI Flange
Select stainless steel meters with 150 lb. ANSI Flanges when you need a meter that installs in-line quickly. Flange Meters are easily installed and removed with four bolts. Combine with GPI’s Computer Electronics for a complete, accurate, metering system.
Downloads: manual | data sheet
LM50M Mechanical Gear Meter
- Extremely accurate.
- Dependable performance.
- Reliable, trouble-free operation.
GM001 – 1/8″ Oval Gear Pulse Meter
The GM001 is one of three compact meters in the Oval Gear Meter line. This meter is small and accurate. Choose from either Aluminum or 316 Stainless Steel body materials, both with stainless steel rotors. The GM001 can handle a wide range of fluid viscosities.
GM002 – 1/4″ Oval Gear Pulse Meter
The GM002 is one of the small capacity meters in the GM Series line and is differentiated by its flowrate capabilities. It has the ability to handle a wide range of fluid viscosities with exceptional levels of repeatability and durability.
GM003 – 1/4″ Oval Gear Pulse Meter
The GM003 is another of the GPI compact pulse meters. This 1/4” Pulse Meter has an increased flow range and offers the same ability to handle a wide range of fluid viscosities with exceptional levels of repeatability.
GM005 – 1/2″ Oval Gear Pulse Meter
The GM005 Meter is a low to medium flow range model. The construction of this meter allows for fast and easy servicing while installed.
GM007 – 1″ Oval Gear Pulse Meter
Use the GM007 with aggressive chemicals and water. The PPS body and rotor materials provide excellent chemical compatibility. This meter is a great choice when you need a rugged and reliable meter.
GM010 – 1″ Oval Gear Pulse Meter
The GM010 Meter is a 1-inch meter available in Aluminum, Bronze and 316 Stainless Steel body materials. Optional 150 lb. ANSI Flanges and Tri-Clover® Fittings are available on the GM010.
GM505 – 1/2″ Oval Gear Mechanical Meter
The GM505 is the 1/2 inch Mechanical Meter in the Oval Gear Series. Use this meter with low to medium flow ranges. The GM505 is available in three fitting/ calibration combinations: NPT Gallon, NPT Liter and BSP Liter).
GM515 – 1 1/2″ Oval Gear Mechanical Meter
The GM515 is a medium to large capacity meter with Mechanical Sensor and Display. Optional 150 lb. ANSI Flanges are available on the GM515 model. This meter can handle high viscosity fluids without sacrificing accuracy.
Downloads: manual
GM015 – 1 1/2″ Oval Gear Pulse Meter
The GM015 is our medium to large capacity meter with 1 1/2-inch fittings. Optional 150 lb. ANSI Flanges and Tri-Clover® Fittings are available on the GM015. The GM015 can be installed without regard to straight pipe runs making installation easy.
GM020 – 2″ Oval Gear Pulse Meter
The GM020 is the largest of our GM Series Meters. The fitting size is 2 inches on this large meter. This meter includes NPT or BSP fittings as standard. Choose from four rotor options; PPS is standard.
GM510 – 1″ Oval Gear Mechanical Meter
The GM510 is a Mechanical Meter available in Aluminum, Bronze and 316 Stainless Steel body materials. Optional 150 lb. ANSI Flanges are available on the GM510.
GM520 – 2″ Oval Gear Mechanical Meter
The GM520 is the Mechanical version of our large capacity meter. Choose from either Aluminum or 316 Stainless Steel body materials. This meter can be mounted horizontally or vertically depending on your application.
Model GFT – S.S. RF ANSI Flange Fitting
Accuracy: ± 0.5% of the true flow at any point within the linear range of the turbine.
Repeatability:± 0.1% of the indicated flow throughout the linear range. (Based on ISA SPEC, ANSI/ISA-RP31.1, ISA-S37.1)
Linearity: ± 0.5% of the mean K-Factor throughout the linear range. (Based on ISA SPEC, ANSI/ISA-RP31.1, ISA-S37.1)
Model GNT – S.S. NPT Fitting
Accuracy: ± 0.5% of the true flow at any point within the linear range of the turbine.
Repeatability: ± 0.1% of the indicated flow throughout the linear range. (Based on ISA SPEC, ANSI/ISA-RP31.1, ISA-S37.1)
Linearity: ± 0.5% of the mean K-Factor throughout the linear range. (Based on ISA SPEC, ANSI/ISA-RP31.1, ISA-S37.1)
G2 Industrial Meters – Tri-Clover®
The GPI Stainless Steel Meters with Tri-Clover® fittings can be used with food, beverage and pharmaceutical industries in pre-process applications. Built of stainless steel construction, these meters come in five sizes to fit most every application.
Model GSCP – S.S. Sanitary Clamp
Accuracy:± 0.5% of the true flow at any point within the linear range of the turbine.
Repeatability:± 0.1% of the indicated flow throughout the linear range. (Based on ISA SPEC, ANSI/ISA-RP31.1, ISA-S37.1)
Linearity:± 0.5% of the mean K-Factor throughout the linear range. (Based on ISA SPEC, ANSI/ISA-RP31.1, ISA-S37.1)
Use this meter in pre-process applications where high accuracy is required without 3-A Approval.
Model GSCPS – S.S. Sanitary Clamp
This meter meets the strict 3-A Sanitary Standards using the new “Third Party Verification (TPV) program. Our methods of design, construction and traceability of components have been reviewed and approved.
The internals of this meter are machined or polished to meet 3-A self-draining and cleaning requirements. The GSCPS Meter meets Clean in Place (CIP), Steam in Place (SIP) and Clean Out of Place (COP) requirements.
Q9 Computer Electronics
This computer electronics is designed specifically for use on FLOMEC® Turbine Housings.
It is also designed to work with several accessory output modules.
The CMOS, microprocessor-based electronics have extremely low power requirements and data retention capabilities in both RAM and ROM. In a FLOMEC turbine meter, liquid flows through the turbine housing causing an internal rotor to spin. As the rotor spins, an electrical signal is generated in the pickup coil. This pulse data from the turbine is translated into calibrated flow units shown on the computer’s display readout.
Downloads: manual